C17200 Beryllium Copper Plate 10mm
Grade Equivalents: UNS C17200 / CuBe2 / Alloy 25 / EN CW103C (High Thermal Conductivity)
Application Focus: Injection Mold Cavities, Core Inserts, Blow Mold Components, & Hot Runner Bases
Executive Standards: ASTM B194 and Industrial Mold Tooling Specifications
Size Range: Thickness 10mm - 200mm, Width & Length Custom Sawn / Precision Ground
Temper Condition: Solution Heat-Treated & Age-Hardened (TF00 / AT) Ready for Machining
Core Purpose: Accelerated Thermal Dissipation and Cavity Durability to Minimize Injection Cycle Times
Quality Assurance: ISO9001:2015, RoHS Compliant, MTC 3.1 Certified
Description
C17200 Beryllium Copper Plate 10mm for Plastic Molds — High Thermal Conductivity & Mold Durability Solutions
C17200 Beryllium Copper Plate 10mm (Alloy 25 / CuBe2 / UNS C17200) is a precipitation hardened copper alloy that contains 1.80-2.00% beryllium. This 10mm plate with 1110-1320 MPa tensile strength, 36-42 HRC hardness and 105-125 W/m·K thermal conductivity is manufactured by Dongguan Jiaye Dingsheng Precision Casting & Forging Co., Ltd, a plant with over 25 years of manufacturing experience.
All goods are supplied with full EN 10204 3.1 MTC certifications, according to ASTM B194 requirements. Stock orders ship in 3-5 days and we provide 24 hour quote for any bespoke wants.
What Is C17200 Beryllium Copper Plate 10mm?
C17200 Beryllium Copper Plate 10mm is a high strength copper alloy which is commonly used for mould and industrial structural parts. The 10mm thickness demands accurate management of the heat treatment process. This involves stabilising the annealing and ageing processes to provide uniform hardness from surface to the core. The plate has a hardness of 36~42HRC after standardised ageing treatment and can maintain stable thermal conductivity, which shows balanced mechanical and thermal performances that are impossible for traditional mould steel.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Grade / Standard | UNS C17200 / ASTM B194 |
| Grade Equivalents | CuBe2 / Alloy 25 / EN CW103C |
| Beryllium (Be) Content | 1.80 – 2.00% |
| Co + Ni (min) | 0.20% |
| Copper | Balance |
| Temper Condition | TF00 / AT (Age-Hardened) |
| Hardness (Aged) | 36 – 42 HRC / 350 – 420 HV |
| Tensile Strength | 1110 – 1320 MPa |
| Yield Strength | 950 – 1150 MPa |
| Thermal Conductivity | 105 – 125 W/m·K |
| Electrical Conductivity | 22 – 25% IACS |
| Thickness Range | 10mm – 200mm |
| Width & Length | Custom sawn / precision ground |
| Surface Condition | Precision saw-cut or ground flat |
| Executive Standard | ASTM B194, AMS 4533 |
| Certifications | ISO 9001, RoHS, REACH, MTC 3.1 |
Cycle Time Reduction Principle
-
Fast heat dissipation: Its thermal conductivity is 3–5 times that of P20 and H13 mold steel, quickly removing internal heat from mold cavities.
-
Stable molding effect: Uniform heat distribution eliminates local hot spots, reducing product warpage, shrinkage and residual stress.
-
Efficient production: Shortens molding cooling cycles and stabilizes product consistency for long-term batch production.
Certificate
Mold Mechanical Performance
-
Deformation resistance: Stable tensile and yield strength resists permanent deformation under high injection pressure and clamping load.
-
Fatigue resistance: Maintains stable structure under repeated cyclic load, lowering mold maintenance frequency.
We adopt three-stage inspection including raw material verification, in-process monitoring and finished product testing. OES composition analysis, multi-point hardness testing and dimensional calibration are implemented for each batch. Ultrasonic flaw detection is optional to check internal structure. All shipments are attached with complete test reports to realize full batch traceability.
Application Scenarios
-
Plastic Injection Molds: Cavity plates, core inserts and hot runner base parts for efficient cooling and stable molding.
-
Oil & Gas Equipment: Non-sparking structural parts applicable for ATEX-standard hazardous working environments.
-
Aerospace & Precision Electronics: Vibration-resistant connectors, bushings and precision mold components.
FAQ
Q1: Can the hardened 10mm plate be machined directly?
A1: Yes. Machinable in HRC 36–42 hardened state with carbide tools and matched cooling process.
Q2: How does 10mm thickness affect heat treatment?
A2: Specific heat preservation time is required to ensure uniform hardness from plate surface to core structure.
Q3: Is the plate non-sparking for hazardous environments?
A3: Yes, it meets non-sparking standards and adapts to ATEX-regulated chemical and oil-gas scenarios.
Q4: What is the delivery cycle for custom sizes?
A4: Standard stock ships in 3–5 days, and custom precision processing takes 5–10 working days.
Q5: What documents can be provided for shipment?
A5: Each batch supports complete EN 10204 3.1 certificates with full performance and dimensional test data.
Contact Us
If you have procurement and customization needs for C17200 Beryllium Copper Plate 10mm, please send your detailed specifications to js01@jstongcai.com.cn. Our team will reply with a professional quotation within 24 hours.
